balsa wood lantern
Step 1 |
Click here for the design in Cricut® Design Space™. |
Step 2 |
Cut the four lantern sides from a sheet of balsa wood and the four simple rectangles from vellum. |
Step 3 |
Determine the front and back as well as the top and bottom of each piece and arrange them on your working surface so they are facing front-side down and top to bottom. |
Step 4 |
Run a line of adhesive tape around the outer most edge of a piece of vellum and attach to one of the lantern pieces. Be sure to cover all shapes are covered by vellum, except for the two narrow rectangles along one side. |
Step 5 |
Repeat Step 4 for the remaining three sides. |
Step 6 |
Assemble your lantern. Slide the tabs on the side of one piece into the narrow rectangles along the side of another lantern piece. |
Step 7 |
Add a third piece and then the fourth until you have a square (assembled lantern). |
Step 8 |
Add an LED candle inside your lantern. |
- Computer
- 1 - 1/16" Balsa Wood by Make Market® (10689258)
Step 1 |
Click here for the design in Cricut® Design Space™. |
Step 2 |
Cut the four lantern sides from a sheet of balsa wood and the four simple rectangles from vellum. |
Step 3 |
Determine the front and back as well as the top and bottom of each piece and arrange them on your working surface so they are facing front-side down and top to bottom. |
Step 4 |
Run a line of adhesive tape around the outer most edge of a piece of vellum and attach to one of the lantern pieces. Be sure to cover all shapes are covered by vellum, except for the two narrow rectangles along one side. |
Step 5 |
Repeat Step 4 for the remaining three sides. |
Step 6 |
Assemble your lantern. Slide the tabs on the side of one piece into the narrow rectangles along the side of another lantern piece. |
Step 7 |
Add a third piece and then the fourth until you have a square (assembled lantern). |
Step 8 |
Add an LED candle inside your lantern. |