you are amazing foil journal
Use matboard from cuttable surfaces to make an inspirational journal for yourself or give as a gift!
Step 1 |
First, click here for the design in Cricut® Design Space™. |
Step 2 |
Now, click ‘Make It’ in the upper right corner of your screen and ‘Continue’ in the lower right corner of the next screen. |
Step 3 |
Place your one of your matboards onto your cutting mat; then choose your material and follow the prompts on your screen to deboss. |
Step 4 |
Do not unload your mat! Use the included tape to attach foil over the area for the design. |
Step 5 |
Unload and gently remove the material from the cutting mat. Discard excess matboard. Set aside. |
Step 6 |
Cut paper to size for your journal. |
Step 7 |
Gather paper and use your binding tool to punch holes along one edge. |
Step 8 |
Punch holes along one side of your matboard pieces as well. |
Step 9 |
Place your debossed, foiled matboard over the cut paper and place and untreated matboard on the back. Align all holes and use the binding tool to add wires. |
Step 10 |
Trim excess wire and use pliers to bend in the cut wire. |
- Computer
- Paper
- 1 - Assorted Tropical Journal by Recollections™ (10479021)
- 1 - Cricut® Foil Transfer Sheets Sampler, Metallic (D256208S)
- 1 - Cricut Maker® 3 (D383141S)
Step 1 |
First, click here for the design in Cricut® Design Space™. |
Step 2 |
Now, click ‘Make It’ in the upper right corner of your screen and ‘Continue’ in the lower right corner of the next screen. |
Step 3 |
Place your one of your matboards onto your cutting mat; then choose your material and follow the prompts on your screen to deboss. |
Step 4 |
Do not unload your mat! Use the included tape to attach foil over the area for the design. |
Step 5 |
Unload and gently remove the material from the cutting mat. Discard excess matboard. Set aside. |
Step 6 |
Cut paper to size for your journal. |
Step 7 |
Gather paper and use your binding tool to punch holes along one edge. |
Step 8 |
Punch holes along one side of your matboard pieces as well. |
Step 9 |
Place your debossed, foiled matboard over the cut paper and place and untreated matboard on the back. Align all holes and use the binding tool to add wires. |
Step 10 |
Trim excess wire and use pliers to bend in the cut wire. |